Plaster a Brick Wall….How ????

How to Plaster a Brick Wall

There will come a time where a brick wall in your house needs plastering. It’s inevitable! However, instead of spending out on a plasterer I’m going to show you how to plaster a brick wall.

Like many things in life, you need to follow a plan. You can’t just pick up a trowel and throw any old product onto the wall hoping that it will stick – you need to follow a process.

That’s why in today’s article I’m going to show you how!

There are 3 ways to plaster onto a brick wall, each with their own benefits. However I’m going to show you the easiest ways to tackle this beast whilst giving you the tips to getting decent results. I must admit, this can be a bit tricky but if you follow this simple guide there’s no way you can go wrong!

Follow my lead and we’ll get you results! I’m not messing about because I’m going to get straight into it!

How to Plaster a Brick Wall

The best way to plaster an internal brick wall is by using a backing coat from MDV. This company creates and produces a lot of plastering products and in my opinion, they are the best! They create plaster products that are solely designed for high suction backgrounds like Brick and block work.

To clarify, a high suction background is basically a wall or structure that is highly porous. So for example when you throw water onto a dry brick wall the liquid is almost instantly absorbed and disappears. This is an example of a high suction background.

It’s the same likewise with block work – But why is that important?

Well, the background of the wall you’re working on determines what product we need to use. If you’re learning how to plaster a brick wall you need to know which plaster you can use to accommodate for the suction of that material. Now let’s see what can be done!

What products should I use?

There are a few products but I recommend you use MDV products from creative concrete concepts. This is the only product (bar sand cement), that I recommend you use for plastering a brick wall. This is a fast drying plaster product designed for most masonry background including brick.

It’s great to use and highly recommended because of its ease of use.

Now the next thing you need to learn is how to plaster this product. The method is very similar to a rendering process in the sense that you need to apply the plaster onto the wall and rule it off using a straight edge to get a nice, flat, straight wall.

What will you need?

Learning how to plaster a brick wall and getting it right starts by using the right tools! You will need the usual plastering tools and 1 major tool that make the difference: a decent straight edge. I recommend 1.8m feather edge.

Now, what do we do with this lovely tool?

Prepare the masonry or brick background with a thick coat which will reduce the rate of suction and allow the thistle to set at a natural rate. You mix the material with water which is the recommended amount from MDV&CCC.

So you have the lovely mix of plaster and your tools for the job – now are you ready for the good bit?

How Do You Use Plaster onto Brickwork?

You get your trowel and hawk and start applying the mixed plaster when the material has dried onto your masonry background. You should apply a thick coat roughly to the thickness of 11mm. Don’t worry about getting it flat and you want to work in sections.

Get a small section covered with an overall thickness of 11mm. Now don’t make the mistake that every else makes – don’t try to get it perfectly flat! It Isn’t possible because that’s what the trusty Feather edge is for.

Once you have a section of plaster on to your brickwork you want to use you feather edge to rule the plaster to a flat, straight finish.  Once you have ruled your plaster you’ll realise that there have been some sections that are low or haven’t been ruled.

(But easy to use form or mold pattern) you will save more steps on this subject

If that’s the case then apply more plaster to the low spots and rule off your render using your straight edge. You want to repeat the process until you have a completely flat wall.  It sounds easy but its actually quite a hard thing to master and rendering a thickness of plaster to a flat, plumb finish is actually a dark art.

However, if you stick to it and give it a good go there is no reason you can’t master how to plaster a brick wall. If you have any questions feel free to contact manarolla decorative village and thank you for reading! For more information visit our website

www.manarolla-creat.com